Joyetech eVic Basic Wrinkle 60w coming soon to the UK

Joyetech are gald to bring you the new eVicBasic 60W with new wrinkle finishes.
The new wrinkle finish with its deep texture was achieved through a remarkably precise treatment. Its end result is so purely and continuously soft beyond imagination.
Joyetech also released the latest firmware V4.14 for the eVic Basic. Maximum output has been upgraded to 60W. Most importantly, you can use the preheat function on your eVic Basic too.

 

Also the CUBIS Pro Mini atomizer perfectly fits the eVic Basic which supports the new preheat, custom logo and RTC (Real Time Clock) functions.
The eVic Basic has the upgradeable firmware with maximum output updating to 60W. It especially comes with the new colorful wrinkle paintings which has a remarkably deep rich texture. E-juice filling can be easily achieved by simply removing the top cap and injecting into the side holes. The innovative CUBIS Pro Mini with leak resistant cup design allows you to enjoy the best vaping experience ever.
Standard Configuration:
1 * eVic Basic 60W Battery
1 * CUBIS Pro Mini Atomizer
1 * BF SS316-0.5ohm DL.
1 * LVC Clapton-1.5ohm MTL.
1 * USB Cable
2 * User Manual
1 * Warranty Card
1 * Warning Card
eVic Basic 60W with CUBIS Pro Mini

Specification:

Size: 22.00*32.00*97.00mm
Battery Capacity: 1500mAh
Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Modes
Output Wattage: 1-60W
e-Juice Capacity: 2ml
Resistance Range: 0.05-1.5ohm for VT/TCR mode
0.1-3.5ohm for VW/BYPASS mode
Temperature Range: 100-315°C/ 200-600°F
Colors: Blue Wrinkle, Red Wrinkle, Orange Wrinkle, Black Wrinkle

eVic Basic 60W with CUBIS Pro Mini
New wrinkle finishes
The new wrinkle finish with its deep texture was achieved through a remarkably precise treatment. The end result
is so purely and continuously soft beyond imagination.
eVic Basic 60W with CUBIS Pro Mini
Preheat function
Basically, the preheat function allows the device to run at a higher wattage to heat up the coil instantly prior to its normal use.
This is especially an essential when using an RDA, RTA, ceramic heads and so on. It can also prolong the coil’s life and achieve a better taste.
eVic Basic 60W with CUBIS Pro Mini
Compact size, powerful output (60W)
The eVic Basic comes with a tiny size which is easy to grip.
Maximum output can be reached to 60W with the latest firmware V4.14.
eVic Basic 60W with CUBIS Pro Mini
RTC (Real Time Clock) On Display
eVic Basic 60W with CUBIS Pro Mini
Top Filling And Top Airflow Control
eVic Basic 60W with CUBIS Pro Mini
CUBIS Pro Mini atomizer adopts top filling and top airflow structure which enables you to refill the e-juice with great convenience. eVic Basic 60W with CUBIS Pro Mini
eVic Basic 60W with CUBIS Pro Mini Simply uninstall the top cap from the airflow ring, then inject the e-juice into the two side holes (not the vent pipe) directly.
Innovative Leak Resistant Cup Design
The completely leak resistant cup-style tank reservoir allows the top section and coil to be removed and as one solid unit.
Coil replacement and juice fill can be achieved by removing this top section from the cup.
eVic Basic 60W with CUBIS Pro Mini
Detachable and Washable Structure
With its special structure, CUBIS Pro Mini atomizer can be easily detached and is able to wash separately.
eVic Basic 60W with CUBIS Pro Mini
SS316 0.5ohm DL. and LVC Clapton-1.5ohm Heads
eVic Basic 60W with CUBIS Pro Mini
SS316 0.5ohm DL. head can be used under Temp SS316 mode, VW mode and TCR mode as you prefer.
eVic Basic 60W with CUBIS Pro Mini
LVC (Liquid Valve Control) Clapton-1.5ohm head applies the liquid valve control system. Simply rotate the ring on the base to adjust the valve.
Dual Circuit Protection
eVic Basic applies two sets of battery protection circuit system, realizing overall battery protection of
over-charging, over-current and over-discharging, which makes it more safe and reliable.
eVic Basic 60W with CUBIS Pro Mini
Firmware Upgradeable
eVic Basic comes with the upgradeable firmware.
Having the latest Version 4.14, new interface and preheat function are available.
eVic Basic 60W with CUBIS Pro Mini
eVic Basic 60W with CUBIS Pro Mini
Exquisite 510 Stainless Steel ThreadApplied with 510 stainless steel thread and wide border fitting for large capacity atomizers.
eVic Basic 60W with CUBIS Pro Mini
Bottom Ventilation Holes
The ventilation holes are placed on the bottom which can greatly help the device for better heat dissipation.
eVic Basic 60W with CUBIS Pro Mini
Charging & Upgrading
Simply connect the device with a micro USB cable to charge or upgrade your device. When it’s fully charged, the charging indicator will go out.
eVic Basic 60W with CUBIS Pro Mini
0
like
0
love
0
haha
0
wow
0
sad
0
angry

Jess
Show full profile

I have been Vaping for 5 years and currently use a Wismec RX200 with Cleito Tank as my EDV

Tell us what you think about this

Leave a reply

Life On Vape
Register New Account
Reset Password